Appearance: Thick liquid
Universal adhesive in water dispersion for gluing unpainted wooden floors, laminated parquet, lamparquet on concrete substrates or other types of absorbent substrates.
Sanageb - Prodotti naturali per la Bioedilizia
Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.
Floor - Prodotti per pavimenti e massetti in calcestruzzo
Use wearing protective gloves
Shelf-life: 6 months
Temperature of use: + 15 / + 25 °C
Gluing of unpainted wooden floors, laminated parquet, lamparquet on concrete substrates or other types of absorbent substrates.
Always check the humidity of the substrate and the wood with specific tools. The measurement of the humidity in the substrate must be made in depth (approx. 2-3 cm) using a carbide hygrometer in order to exclude the possible presence of highly hygroscopic substances (such as pumice, vermiculite), which can give off humidity contained in them with the consequent swelling of the floor. Do not lay on screeds which are not protected from possible rising damp (always position a suitable vapour-tight sheath). The thin or powdery cementitious substrates must be consolidated with suitable products in order to facilitate a perfect adhesion of the adhesive. Do not lay in rooms that are not fitted with windows or doors. Do not lay if the walls and ceilings of the room are not perfectly dry.
Bring the product to the environment temperature before use. Spread the adhesive on the substrate with a wide-toothed spatula (n° 5), working it in order to incorporate any residual dust. The application of the adhesive must be carried out in small areas in order to avoid the formation of the surface film before laying the wood. Before gluing, always check the humidity in the screed, which must be < 2% (do not use WOODKOLL on fast drying or anhydrite screeds). Environment temperature between 15 and 25°C, relative humidity not exceeding 75%.
Always use specific personal protection systems. Always consult the technical and safety data sheet of the product.
- Notched finishing trowel
- Floor screed
Do not use WOODKOLL for laying prefinished parquet. When laying lamparquet or strips, avoid gluing on the sides. Do not use WOODKOLL on fast drying or anhydrite screeds. Bring the product to a temperature of 20°C before application.
Two-component cement adhesive designed specifically for casting tiles, even with low absorption, on waterproof surfaces with osmotic cement or on concrete surfaces.
Cement adhesive/finishing coat, with high working bonding, specifically for installation of insulating panels in polystyrene foam, in the construction of thermal coating.
Azichem's leading product in the natural adhesives sector, specifically for ecological building work. Also an excellent adhesive/finishing coat for natural, modular panels.
White cement base version of UNIKOLL. Used in ecological building work for floors with low or no absorption.
Universal adhesive for tiles of any kind (except wood), for vertical or horizontal surfaces, for indoors and outdoors. Azichem's adhesive bestseller. Recommended!