UNISAN BIANCO

Dehumidifying, structural, reinforcing, white cement plaster

Code: INT.0200

Components: 1

Appearance: Powder

Composite , reinforced fibre, reinforcing, dehumidifying cement mortar, for the structural renovation of vintage masonry or dilapidated monuments. UNISAN BIANCO is composed of "pure" white cement, selected aggregates, specific agents, alkali resistant fibres. It brings together in a single product, the characteristics of compression strength (23 N/mm²) and the dehumidifying quality of a macroporous plaster. UNISAN BIANCO allows the vertical reinforcement of masonry walls, by "reinforced slabs", using only one product which renovates and strengthens at the same time.

Customs Code

3824 5090

Certification obtained and Standards

EN 998-1

Specification for Mortar for Masonry - Mortars for renovations (R)

Sanageb - Prodotti naturali per la Bioedilizia

Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.

General characteristics

Shelf-life: 12 months

Pot-life: 60 min

Max. recommended thickness: 40 mm

Solvent-free

Use wearing protective gloves

Temperature of use: +5 / +35 °C

Nonflammable

Highlighted product

Maximum diameter of aggregate: 1.5 mm

Min. recommended thickness: 20 mm

Technical specifications

Capillary absorption

0.14 kg•h^0.5/m²

Static elastic modulus

11700 N/mm²

Breathability

10-11 μ

Bonding force

> 0.9 N/mm²

Water/binder ratio

< 0.40 _

Compressive strength

> 25 N/mm²

Reaction to fire

A1 _

Flexural strength

> 6 N/mm²

> 12 _

Density

1750 kg/m³

Available colours

- White

Packaging and dimensions

- Bag 25 kg

- Pallet: 50 x (Bag 25 kg)

Consumption

Approximately 15 kg/m² of UNISAN BIANCO for every centimetre of thickness to be implemented (approximately 1500 kg per cubic metre).

Use fields

Construction of plasters and reinforced slabs in interventions of restoration, construction of plaster and dehumidifying coatings with high performance, bedding of bricks and modular elements.

Preparation of supports

The surfaces should be clean and free of any soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition of "saturated dry surface".

In the case of structural reinforced slabs, you will need to proceed with applying an appropriate reinforcing electrowelded mesh, to be fixed with REPAR TIX G2 or GROUT MICRO-J.

Use method

Pour about 2/3 of the mixing water into the mixer, add UNISAN BIANCO and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-14% of the weight of the bag. After mixing is completed wait a few minutes before applying. Apply the product by plastering trowel and brick trowel, or preferably with plastering machine (type PFT model G4).

Application methods

- Brick trowel

- Finishing trowel

- Plastering machine

- Straight edge

Tool cleaning

- Water

Permitted supports

- Bricks

- Tuff

- Mixed walls (bricks and stones)

- Brickworks

- Stone walls

Warnings, precautions and Ecology

Do not apply in case of direct exposure to sunlight or excessive ventilation. Cure the protection and the prolonged moist hardening, of exposed surfaces.