UNIKOLL

Mono-component adhesive based on hydraulic binders

Code: FLR.0210

Components: 1

Appearance: Powder

Mono-component adhesive, fast gripping and hydrating, based on special cements, free from harmful additives, adhesion agents starch derivatives selected siliceous and limestone sands, high pozzolanicity reactive fillers, cellulosic thickeners.

Consumption
4 kg /m²
Minimum-maximum consumption
3-5 kg /m²

General characteristics

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 0.3 mm

shelf-life

Shelf-life: 8 months

pot-life

Pot-life: 60 min

mix-with-water

Mix with water: 28 %

temperature-of-use

Temperature of use: +5 / +30 °C

Technical specifications

1.34 N/mm²

< 0.5 mm

1.16 N/mm²

Available colours

- Gray

Use fields

Bonding of tiles, ceramics, stoneware, natural and/or reconstructed stones, etc. on horizontal and vertical surfaces, internal and external. Regularisation finishings. Modular element bonding and smoothing for insulating cladding: polystyrene sheets, wood panels- magnesium panels, wood-cement, etc. Do not use for:
- Substrates in gypsum or anhydrite
- Substrates subject to movements
- Substrates with protective films or coatings

Preparation of supports

The surfaces of application have to be properly cured, conveniently roughened, clean, free of any soiling whatever its nature, crumbling and non-adhering parts, dust etc. Any traces of oils, greases, release agents, waxes, paints, etc., as well as any anti-adhesive substance, should be preliminarily removed.

Use method

For each 25 kg bag of UNIKOLL, add 6-6.3 litres of clean water and mix thoroughly, with a mechanical stirrer, until a homogeneous lump-free mixture is obtained. After waiting a few minutes, stir and spread the adhesive with a toothed adhesive spreader.

The products (tiles or other coatings) should be applied with a slight pressurised movement for the entire surface to be in perfect contact with the adhesive. Any adjustment must be made within 10-12 minutes of laying. For applications outdoors, apply a continuous layer of adhesive also on the back of the item.

Application methods

- Notched finishing trowel

Tool cleaning

- Water

Permitted supports

- Concrete

- Prefabricated concrete

- Tuff

- Brickworks

- Stone walls

- Tiles

- Floor screed

Warnings, precautions and Ecology

Do not apply in case of direct exposure to sunlight and/or rain.
Cure the protection for at least 24 hours.

Share

Calculate consumption

Calculate an approximate measurement of necessary consumption for this product