Mono-component adhesive, high-performance, fast gripping and hydration, based on "pure" white cements (free from harmful additives), adhesion agents starch derivatives selected siliceous and limestone sands, high pozzolanicity reactive fillers, cellulosic thickeners. Perfect for the installation of tiles on both horizontal and vertical surfaces, in both internal and external environments.
Sanageb - Prodotti naturali per la Bioedilizia
Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.
Floor - Prodotti per pavimenti e massetti in calcestruzzo
Maximum diameter of aggregate: 0.3 mm
Pot-life: 60 min
Mix with water: 28 %
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
< 0.5 mm
Bonding tiles, ceramics, terracotta, sandstone, natural and/or reconstructed stones, etc. on horizontal and vertical surfaces, indoors or outdoors.
The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc. Any traces of oils, greases, release agents, waxes, paints, etc., as well as any substance with releasing effect, should be preliminarily removed. Surfaces must finally be conveniently roughened, as well as saturated with water until they reach the condition of "saturated with dry surface".
Pour about 2/3 of the mixing water into the mixer, add UNIKOLL WHITE and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 22-24% of the weight of the bag.
After waiting for a few minutes, stir and spread the adhesive with toothed adhesive spreader. The artefacts (e.g. tiles) should be applied with a slight pressurised movement to ensure the whole surface is in perfect contact with the adhesive. Any adjustment must be made within 10-12 minutes of laying. For outdoor applications, apply a continuous layer of adhesive on the back of the item ("sucker" effect).
- Notched finishing trowel
- Prefabricated concrete
- Stone walls
- Floor screed
Do not use on:
- Media in gypsum or anhydrite
- Media subject to movements
- Media with protective film
Formaldehyde-free vinyl adhesive to glue floors in parquet or raw planks.
Two-component cement adhesive designed specifically for casting tiles, even with low absorption, on waterproof surfaces with osmotic cement or on concrete surfaces.
Cement adhesive/finishing coat, with high working bonding, specifically for installation of insulating panels in polystyrene foam, in the construction of thermal coating.
Azichem's leading product in the natural adhesives sector, specifically for ecological building work. Also an excellent adhesive/finishing coat for natural, modular panels.
Universal adhesive for tiles of any kind (except wood), for vertical or horizontal surfaces, for indoors and outdoors. Azichem's adhesive bestseller. Recommended!