SYNTECH PRIMER EP

Solvent-free two-component epoxy primer for cement surfaces

Code: SYN.0360

Components: 2

Appearance: Liquid

SYNTECH PRIMER EP is a solvent-free two-component epoxy resin to be used as a bonding primer for applying all epoxy cycles on concrete surfaces and concrete conglomerates in general. SYNTECH PRIMER EP is formulated to achieve an elevated impregnation, consolidation and adhesion effect of the substrate. It can also be used on wet surfaces. SYNTECH PRIMER EP even penetrates deep into compact surfaces, effectively consolidating the support. It also has a great resistance to water and aggressive solutions whilst allowing water vapour to pass through.

Certification obtained and Standards

Product of the Floor line, the line of products from Azichem Srl dedicated to the main, complementary products and accessories for the construction, restoration and/or renovation of concrete floors and screeds.

Floor - Prodotti per pavimenti e massetti in calcestruzzo

Product of the Floor line, the line of products from Azichem Srl dedicated to the main, complementary products and accessories for the construction, restoration and/or renovation of concrete floors and screeds.

General characteristics

dosage

Dosage: 300 - 500 g/m²

pot-life

Pot-life: 30 min

shelf-life

Shelf-life: 12 months

mixing-ratio

Mixing ratio: 2:1 _

use-wearing-protective-gloves

Use wearing protective gloves

density

Density: 1.1 kg/l

use-wearing-protective-glasses

Use wearing protective glasses

temperature-of-use

Temperature of use: +10 / +35 °C

Technical specifications

Compressive strength

55 MPa

Shear strength

18.8 MPa

Available colours

- Amber

Packaging and dimensions

- Can 1 kg [A]

- Can 0.5 kg [B]

- Kit: 1 Can 1 kg [A] + 1 Can 0.5 kg [B]

- Can 6 kg [A]

- Can 3 kg [B]

- Kit: 1 Can 6 kg [A] + 1 Can 3 kg [B]

Consumption

Use 300 to 500 grams per square metre per coat, depending on the porosity and unevenness of the support. On particularly absorbent surfaces, apply 2 coats of SYNTECH PRIMER EP.

Use fields

Promotes adhesion for epoxy coatings as well as for porous and deteriorated substrates, along with acting as a cement and concrete consolidation agent.

Preparation of supports

Thoroughly clean and degrease the surfaces, removing stains, paint residues and loose parts of any kind. Determine the most convenient type of mechanical preparation (sandblasting, hydrowashing, etc.). Surfaces are also to be free of patchiness and, where appropriate, levelled and smoothed with REPAR TIX BIC or REPAR SM BIC.

Use method

Mix the two components, each in its own container, before combining. Pour component B into component A and mix for 3 to 5 minutes with a low-speed mixing drill to achieve the complete homogenisation of the mixture. The protective coating can be applied once the SYNTECH PRIMER EP is completely dry.

Application methods

- Brush

- Paint roller

Tool cleaning

- Thinner for resins

Permitted supports

- Concrete

- Brickworks

- Tiles

- Floor screed

- Porphyry and natural stones

Share

Products on display

  • Pro Seal
  • Osmocem
  • Readymesh