Coloured finish with 2 components, based on epoxy and amino resins in aqueous dispersion, with a high solid content. Ideal for the pigmented coating of industrial flooring and concrete products in general. Surfaces treated with SYNTECH PAVICROM are easy to clean and offer excellent resistance to mechanical wear, as well as having a high resistance to water, alkaline solutions, detergents and hydrocarbons (oil, diesel, petrol and the like).
Floor - Prodotti per pavimenti e massetti in calcestruzzo
Product of the Floor line, the line of products from Azichem Srl dedicated to the main, complementary products and accessories for the construction, restoration and/or renovation of concrete floors and screeds.
Dosage: 400 - 450 g/m²
Pot-life: 40 - 60 min
Density: 1.40 (±0.05) kg/dm³
Shelf-life: 12 months
Mixing ratio: 10:2.3 _
Use wearing protective gloves
Temperature of use: +8 / +30 °C
Use wearing protective glasses
To be applied in two coats
Comp A: 4300 / Comp B: 380 mPas
Hard to touch
4 - 8 h
Permeability to water vapor
Classe III (120 m) _
Resistance to abrasion
- Can 10 kg [A]
- Can 2.3 kg [B]
- Kit: 1 Can 10 kg [A] + 1 Can 2.3 kg [B]
In two coats, apply 0.40 to 0.45 kilograms of SYNTECH PAVICROM per square metre of surface to be covered.
For protective and decorative painting of concrete floors, reviving the colour of old resin flooring, wall plinth enamelling, and so on. Perfect for mechanical workshops, manufacturing industries, warehouses and factories generally in which special and high chemical and mechanical resistance are required.
Thoroughly clean and degrease the surfaces, removing stains, paint residues and loose parts of any kind. Determine the most convenient type of mechanical preparation (sandblasting, hydrowashing, etc.). Surfaces are also to be free of patchiness and, where appropriate, levelled and smoothed with REPAR TIX BIC or REPAR SM BIC. Apply by roller, brush or spray with approximately 300 to 500 g/m2 of SYNTECH PRIMER EP to consolidate the surface and facilitate the adhesion of the subsequent coating. Apply SYNTECH PAVICROM upon complete drying of the primer and no later than 24 hours. In the event of the presence (even suspected) of moisture resulting from capillary rising phenomena from the substrate, it is recommended to first apply SYNTECH PAVIDAMP, the epoxy resin for “wet surfaces”.
Tiled floors or surfaces with pre-existing resin must be subjected to mechanical roughening performed by peening, milling, bushhammering, and so on, until the waterproof crust and opaque surfaces have been entirely eradicated. Remove the dust following the abrasion.
Mix component A and component B separately, directly in their packages, in advance. When applying, combine the two components into a single container and thoroughly mix for 2 minutes using appropriate equipment (trolling motor). To prevent any errors in the mixing ratio that would result in a lack of or incomplete hardening, do not extract partial quantities from the packaging. Next, pour component B into the container of component A.
SYNTECH PAVICROM is applied with a “short-pile” roller within 24 hours after applying the primer. We recommend applying two overlapping coats of the product, at temperatures not lower than +8° C. The second coat must be applied within 24 hours. 3-5% by weight of quartz B0 or B1 (or hollow glass microspheres) can also be added to achieve a non-slip effect.
- Paint roller
- Prefabricated concrete
- Floor screed
It is the high strength version of SYNTECH PAVICROM. Suitable to coat sewers and supports in contact with abrasive chemicals.
Coloured acryl-polyurethane varnish, specifically for swimming pool coatings and any support in constant contact with water, both fresh and salt water.