Cleaning agent specific for the necessary equipment during operations of injections to stop the infiltration of water in the buildings. Oily rinsing detergent, low toxicity, high solvent capacity for non-hardened polyurethanes, to clean and lubricate the internal pumping hydraulic circuits of both manual and electric pumps. It replaces acetone, methylene chloride and other detergents commonly used.
Shelf-life: 12 months
Use wearing protective gloves
Use wearing protective glasses
Density: 1.05 kg/dm³
Temperature of use: +10 / +30 °C
- Transparent tending pale yellow
- Can 10 kg
Product to buy as needed.
Cleaning the equipment for water-reactive polyurethane injections in the masonry. Removal of the non-hardened polyurethane residues.
Upon completion of the operations of injection of water-reactive polyurethane-based masonry products, it is necessary to perform a careful cleaning of pumping equipment before their resting. To this end, first circulate Nitro thinner in the hydraulic circuits of the pump for a few minutes, in order to rapidly dissolve the hardened polyurethane residues.
After cleaning the pumping circuits, circulate the specific detergent oil lubricant SYNTECH H.A.G. CLEANER, undiluted, for a few minutes, in the same circuits. A small amount of product must be left inside the pumping circuits in order to keep them lubricated during the resting period of the pump.
The estimated consumption will be approximately 2 litres for every clean pump per working day.
Stir well before use. Avoid contact with eyes. Wear appropriate protective safety clothing, gloves and glasses.