SANAZIEG

Specific adhesive mortar for jointing and filling of exposed face masonry

Code: INT.0175

Components: 1

Appearance: Powder

Adhesive high breathability and moldability mortar, based on hydraulic lime, for filling the vanishing points between elements in stone, brick, mouldings, decorative articles etc., in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. It can be added with earth colours, ornamental aggregates etc.

Certification obtained and Standards

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

EN 998-1

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

Sanageb - Prodotti naturali per la Bioedilizia

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

General characteristics

pot-life

Pot-life: 60 min

shelf-life

Shelf-life: 12 months

mix-with-water

Mix with water: 14-16 %

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 0.8 mm

Technical specifications

Bonding force

1.42 N/mm²

Coefficient of permeability

18 μ

Flexural strength

> 4.5 N/mm²

Complete hardening

30 day

Capillary absorption

0.40 kg•h^0.5/m²

Compressive strength

> 23 N/mm²

Available colours

- Light hazel

Characteristics

SANAZIEG is a product consisting of hydraulic lime, botticino, kaolin, calcium caseinate, Vichy salt, tartaric acid, ammonium salts and natural fibres. It has high hygroscopicity and breathability, contains no cements, resins, solvents and radioemissive substances.

Use fields

Jointing and filling interstices between bricks, or between bricks and stones, in mouldings, and in decorative articles, etc., in interventions of restoration and rehabilitation of old buildings and buildings of historical interest.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

Pour about 2/3 of the mixing water into the mixer. Gradually add SANAZIEG and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. The mixing water indicatively necessary is equal to 14%-16% by weight (3.5 - 4 litres per 25 kg bag).

Apply with trowel, mechanical plastering machine, etc., in the interstices prepared as specified.

To highlight the aggregate, use a sponge or a wet brush as soon as the plaster SANAZIEG begins to harden. For more significant removals, spray retardant solutions like PRERIT, immediately after spreading.

Application methods

- Brick trowel

- Dispensing gun

- Pump

- Spatula

Tool cleaning

- Water

Permitted supports

- Bricks

- Mixed walls (bricks and stones)

- Stone walls

Warnings, precautions and Ecology

Protect fresh surfaces from direct exposure to sunlight, from the rain and wind, cure the prolonged moist hardening.

Share