Breathable, natural, non-toxic paint, for external and internal surfaces, for adhesion and microcrystalline structure, based on stabilized potassium silicate. Mineral-based, active formulation, with high natural mildewcide and anti-condensation properties, prepared according to the traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Shelf-life: 12 months
Density: 1.46 kg/dm³
Temperature of use: +8 / +30 °C
To be applied in two coats
Coefficient of permeability
Wet abrasion resistance
- Pail 4 l
- Pail 14 l
SANAXIL P consists of potassium silicate and natural pigments. It has very high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances and toxic emissions in general, and does not have thermoplastic effects.
Apply from 0.30 to 0.40 liters of SANAXIL P per square metre of surface to be painted.
Restoring and decorative paints for internal and external environments.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Pre-existing paints (washable, organic, solvent based etc. ) must be thoroughly removed.
Preliminarily treat the support with the fixative SANAXIL FIX.
Apply SANAXIL P, using a brush, roller or spray, in the number of coats required by the absorption condition of the support. SANAXIL P is "dust-free" (it has started to be consistent to the touch) after about 1 hour. It can be overcoated after 4-6 hours, while it will be dry in-depth after 10-16 hours.
SANAXIL P can be used as such or diluted with SANAXIL FIX, at a rate of 15-20% by weight.
- Paint roller
- Cement-based or lime-based mortars
- Prefabricated concrete
Do not apply on surfaces in gypsum, on non-hardened surfaces, on wet or hot surfaces, with direct sunlight. Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.
During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified by accidental contact with silicate solutions.
Colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication stages, the colour may be subject to slight variations.
It is classic acrylic paint for any type of paint support. Due to its elastomer nature, it is also suitable for surface micro-cracks. Recommended!
PROTECH QUARZ PLAST
Classic acrylic "quartz" paint. Efficient, reliable and cheap!
PROTECH SIL P
Siloxane paint, water-repellent, transparent with high UV ray resistance. Also excellent on indoor surfaces, if you want to create washable paint. Recommended!
PROTECH SIL P WAX PEARL
It is Azichem's highest technological expression in the protective paint field for wall surfaces. It is breathable and highly water-repellent, with a Lotus flower effect and sufficient elastomeric. Recommended!
High breathability acrylic paint (in the acrylic paint sector). Less elastic than PROTECH ELC, it is recommended for painting supports not yet perfectly cured, for example new concrete renovation work.
High breathability acrylic paint (in the acrylic paint and deformability sector). Azichem's bestseller in elasticised coatings for concrete and walls. Recommended for marine and mountain environments and difficult situations.
It is the version only applicable on indoor surfaces of SANAFARBE P.
Classic paint with lime putty, suitable for indoors and outdoors. Non-toxic, totally natural and ecological.
It is the version only applicable on indoor surfaces of SANAXIL P.