SANAXIL P - THERM

Potassium silicate paint, thermo-reflective with chemical adhesion

Code: PRT.0338

Components: 1

Appearance:

Stabilized potassium silicate paint, thermo-reflective with chemical adhesion, with excellent covering power (class 1 according to EN 13300 for a yield of 6/7 m2/l). Formulated with polymeric dispersion in saponifiable matter, hollow spheres, pigments and inorganic fillers and additives in a content that guarantees the fulfilment of physical parameters such as: permeability, water repellency, CO2 diffusion, etc.

Linee di appartenenza

General characteristics

density

Density: 1.46 kg/dm³

highlighted-product

Highlighted product

shelf-life

Shelf-life: 12 months

solvent-free

Solvent-free

to-be-applied-in-two-coats

To be applied in two coats

use-wearing-protective-glasses

Use wearing protective glasses

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

0.005 m

Coefficient of permeability

0.26

Deep hardening

16 - 24 h

Dry residue

59 %

Dust-free time

30 min

Hard to touch

1 - 2 h

Permeability to water vapor

50 μ

Available colours

- White

Packaging and dimensions

- Pail 4 l

- Pail 14 l

Consumption

Apply from 0.18 to 0.25 litres of SANAXIL P-THERM per square metre of surface to be painted.

Use fields

Thermal insulation paint that allows the realization of a thermal insulation with the obvious advantages of recovering the thermal mass from the walls, both internal and external, and eliminating bridges and thermal changes of the buildings. The SANAXIL P - THERM line, due to its mineral nature with chemical adhesion, revolutionizes the concept of adhesion to the support, penetrating deeply into the pores of the wall to then react with its components and form a unique and indissoluble "silicating" whole.

Preparation of supports

SUPPORTS ALREADY PAINTED WITH SILICATE PAINT
Remove any stains and proceed with painting with the silicate paint. (it is always recommended to apply a coat of silicate impregnating agent).
NEW SUPPORTS
Apply a coat of potassium silicate fixative diluted from 30/40% with water depending on the absorption of the support.
OLD SUPPORTS
On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with potassium silicate impregnating agent diluted 30/40% with water depending on the absorption of the support.

Use method

DILUTION (in volume with potable water)
1st COAT
BRUSH: 15% one coat crossed or two coats 12-24 hours apart
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%
2nd COAT
BRUSH: 10%
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%

Application methods

- Low pressure airless nebulizer

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Prefabricated concrete

- Paint

Warnings, precautions and Ecology

Do not apply on surfaces in gypsum, on non-hardened surfaces, on wet or hot surfaces, with direct sunlight. Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.

During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified by accidental contact with silicate solutions.

Colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication stages, the colour may be subject to slight variations.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Readymesh
  • Protech Balcony
  • Syntech Poliurea