Natural, protective, decorative, breathable, pigmented, non-toxic, anti-mildew putty coat, based on stabilised potassium silicate. Formulation prepared according to the traditional recipes, for use in ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Specifications for organic binder based interior and exterior plasters
Shelf-life: 12 months
Density: 1.77-1.82 kg/dm³
Temperature of use: +8 / +30 °C
To be applied in two coats
Coefficient of permeability
- Pail 5 kg
- Pail 25 kg
SANAXIL I is a product consisting of stabilised potassium silicates, botticino, natural pigments. It is highly breathable and mildewcide and antibacterial properties. It does not contain resins, solvents, thinners and harmful or toxic emanations.
Indicative consumption depending on the different particle sizes of SANAXIL I available:
1 mm GRAIN: approximately 1.25 -1.40 kg/m²;
1.2 mm GRAIN: approximately 1.40 -1.55 kg/m²;
2 mm GRAIN: approximately 1.85 -2.15 kg/m²;
2.2 mm GRAIN: approximately 2.00 -2.30 kg/m².
The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test.
Restoring protective coatings based on stabilised potassium silicates, for vertical and horizontal surfaces.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". Existing paints (washable, organic, solvent-based etc.) must be removed.
Homogenise the surfaces by applying the fixative SANAXIL FIX. Spread SANAXIL in two coats: the first, for simple deposition, with steel trowel, the second, for spreading and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, under one of two suggested conditions: with dry trowel, for smooth surfaces; with moistened trowel, for antique-effect surfaces.
SANAXIL I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours.
- Finishing trowel
- Sponge float
- Cement-based or lime-based mortars
Do not apply on surfaces in gypsum, on surfaces that are not cured, on moist or hot surfaces, with direct solar radiation.
During application, protect glass, enamelled metals, aluminium, polished tiles etc., which may be opacified from accidental contact with silicate solutions.
Colours may vary slightly depending on the temperature conditions at the time of spreading and during drying and dessication phases.
PROTECH SIL I
Classic siloxane putty. Breathable, resistant and totally water repellent. Recommended product!
It is classic lime putty; a non-toxic product, breathable and totally natural and ecological. Reliable, efficient and convenient!
SANAFARBE MARMORINO FINITURA
it is classic putty to create finishes with a Marmorino effect. Breathable, natural and ecological.
SANAFARBE MARMORINO FONDO
Specific base to create marbled effect on wall surfaces. To combine with SANAFARBE MARMORINO FINITURA.