Adhesive compound with high breathability and moldability, based on hydraulic lime, for the filling vanishing points between tiles etc. in horizontal and vertical applications, ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.
Shelf-life: 12 months
Pot-life: 60 min
Mix with water: 14-16 %
Temperature of use: +8 / +30 °C
Maximum diameter of aggregate: 0.3 mm
- Light hazel
- Bag 25 kg
- Pallet: 50 x (Bag 25 kg)
Product consisting of hydraulic lime, botticino, kaolin, calcium caseinate, ammonium salts and natural fibres. It does not contain cement, solvents, resins or radioemissive aggregates.
Use 0.5 to 2 kg of SANASTUCK per square metre of surface to be grouted.
Puttying filling for vanishing points between tiles, in internal floorings of buildings.
The application supports should be clean, intact, free from fouling, powder, crumbling and non-adhering parts and sufficiently moist.
Pour about 2/3 of the mixing water into the mixer, or into a bucket from the building site; gradually add SANASTUCK and the water still required, continue to mix until a lump-free mixture of the desired consistency is obtained. Apply fillings as usual. The mixing water indicatively necessary is equal to 14-16% by weight (3.5 -4 litres per 25 kg bag).
- Sponge float
- Floor screed
It is always essential to carry out preliminary tests to check the appropriateness of the product, depending on specific requirements,.
Cure the protection and the prolonged moist hardening of fresh exposed surfaces.