SANASTOF BIANCO

Dehumidifying, macroporous, finishing skims, white

Code: INT.0211

Components: 1

Appearance: Powder

Smoothing, adhesive, breathable compound, with a fine particle size, based on hydraulic binders, for finishing, smoothing, internal and external walls, in ecological building works and in the restoration of vintage buildings and monuments.

Certification obtained and Standards

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

EN 998-1

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.

Sanageb - Prodotti naturali per la Bioedilizia

Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.

General characteristics

shelf-life

Shelf-life: 12 months

pot-life

Pot-life: 45 min

max-recommended-thickness

Max. recommended thickness: 5 mm

nonflammable

Nonflammable

temperature-of-use

Temperature of use: +6 / +30 °C

mix-with-water

Mix with water: 22-24 %

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 0.7 mm

min-recommended-thickness

Min. recommended thickness: 2 mm

Technical specifications

Bonding force

1.8 N/mm²

Density

1600 kg/m³

Thermal conductivity

0.67 W/m*K

Coefficient of permeability

22-25 μ

Available colours

- White

Characteristics

SANASTOF BIANCO is a product made from hydraulic binders, white cement, botticino, kaolin, calcium caseinate, Vichy salt, tartaric acid, ammonium salts and natural fibres. It is a natural product with high intrinsic breathability and does not have traces of resins, solvents, thinners and radioemissive aggregates.

Use fields

Breathable finishing coats for wall coverings before painting or applying putty coat or marbled finishes.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

Pour about 2/3 of the mixing water into the mixer. Gradually add SANASTOF BIANCO and the water still required, continue to mix until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with trowel or spatula. The mixing water indicatively necessary is equal to 22-24% by weight (5.5 -6 litres per 25 kg bag).

Application methods

- Finishing trowel

- Plastering machine

- Spatula

- Sponge

Tool cleaning

- Water

Permitted supports

- Plasters

- Cement-based or lime-based mortars

Warnings, precautions and Ecology

Prolonged moist hardening and the convenient protection of fresh surfaces from direct exposure to sunlight, from the rain and wind, are essential for proper curing.

Any subsequent coatings (painting or coloured plaster layers) should be realised with products that have a value of μ not exceeding 12 (lime putty, potassium silicates or siloxanes).

Share

Products on display

  • Protech Balcony
  • Pro Seal
  • Osmocem