Adhesive based on hydraulic lime for bondings, coatings and finishing coats

Code: FLR.0147

Components: 1

Appearance: Powder

Adhesive monocomponent plaster, based on hydraulic lime, for bonding tiles etc., on hardened and compact building supports; also specific for the installation of wood-magnesium panels, cork panels and other types of ecological modular panels, in the construction of "natural coats" (internal and external), for ecological building interventions and in the restoration of vintage buildings and monuments.

Linee di appartenenza

Certification obtained and Standards

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

EN 998-1

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

General characteristics


Shelf-life: 12 months


Pot-life: 60 - 75 min


Mix with water: 16-18 %


Temperature of use: +6 / +30 °C


Maximum diameter of aggregate: 0.3 mm

Technical specifications

Flexural strength

> 5 N/mm²

Bonding force

1.5 N/mm²


12 - 13 μ


1650 kg/m³

Compressive strength

> 17 N/mm²

Available colours

- Light hazel

Packaging and dimensions

- Bag 25 kg


Use from 3 to 5 kg/m² of SANAKOLL depending on the type of support and the type of material to be bonded.

Use fields

Bonding tiles, ascertained to be porous, averagely absorbent and absolutely not clinkerised (use only for interior floor coverings). Bonding and smoothing coating of panels and modular elements in mineralised wood, cork, etc.

Preparation of supports

The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed.

Use method

Gradually pour about 2/3 of the mixing water into the mixer, Gradually add SANAKOLL and the water still required, continue to mix until a completely lump-free mixture is obtained. The methods of use are differentiated based on the support materials and the specific destination of use.

For bonding on ordinary, absorbent, internal subbases, spread the product with a toothed adhesive spreader in continuous layers of adequate thickness and then lay on site the elements to be installed (tiles, panels, etc.), with the appropriate and usual methods, exerting the pressure required to promote adhesion.

Application methods

- Notched finishing trowel

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Floor screed

Warnings, precautions and Ecology

Protect fresh surfaces from direct exposure to sunlight, from the rain and the wind, and cure the prolonged moist hardening.

Preliminarily ascertain the necessary mechanical strength of the support.


Products on display

  • Protech Balcony
  • Osmocem
  • Sanageb