Breathable, natural, non-toxic paint, for internal and external surfaces, diffusive type, based on lime putty. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Dosage: 0.35 - 0.40 l/m²
Shelf-life: 12 months
Density: 1.30 kg/dm³
Temperature of use: +8 / +30 °C
Wet abrasion resistance
Coefficient of permeability
- Pail 4 l
- Pail 14 l
Product based on lime putty and natural pigments.
SANAFARBE P has a high breathability, remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general.
Apply from 0.20 to 0.40 liters of SANAFARBE P per square metre of surface to be painted.
Decorative and internal and external restoration paint.
The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, SANAXIL FIX primer, based on potassium silicate. The application of SANAXIL FIX can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio.
Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours.
It allows the easy reproduction of traditional finish type: sponging, rubbing, marbling, infilling. SANAFARBE P is dry to the touch after 2 hours, it can be overcoated after 4 hours, while it will be dry in-depth after 8-16 hours.
- Paint roller
- Cement-based or lime-based mortars
- Plaster (gypsum)
The colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication steps.
Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.
It is classic acrylic paint for any type of paint support. Due to its elastomer nature, it is also suitable for surface micro-cracks. Recommended!
PROTECH QUARZ PLAST
Classic acrylic "quartz" paint. Efficient, reliable and cheap!
PROTECH SIL P
Siloxane paint, water-repellent, transparent with high UV ray resistance. Also excellent on indoor surfaces, if you want to create washable paint. Recommended!
PROTECH SIL P WAX PEARL
It is Azichem's highest technological expression in the protective paint field for wall surfaces. It is breathable and highly water-repellent, with a Lotus flower effect and sufficient elastomeric. Recommended!
High breathability acrylic paint (in the acrylic paint sector). Less elastic than PROTECH ELC, it is recommended for painting supports not yet perfectly cured, for example new concrete renovation work.
High breathability acrylic paint (in the acrylic paint and deformability sector). Azichem's bestseller in elasticised coatings for concrete and walls. Recommended for marine and mountain environments and difficult situations.
It is the version only applicable on indoor surfaces of SANAFARBE P.
It is the version only applicable on indoor surfaces of SANAXIL P.
Classic paint with potassium silicate, suitable for indoors and outdoors. Non-toxic, totally natural and ecological. Lasts longer than SANAFARBE P.