SANAFARBE MARMORINO FONDO

Lime putty skim preliminary to marbled finishes

Code: PRT.0151

Components: 1

Appearance: Paste

Mineral plaster for exteriors and interiors, based on lime putty, dust and granulometrically balanced marble grain, mineral pigments and specific agents, for the uniforming preparation of rough or wrinkled screeds, for ecological building interventions, new buildings and in the restoration of vintage buildings and monuments. Specific preparation for subsequent application of SANAFARBE MARMORINO FINITURA.

Certification obtained and Standards

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

Sanageb - Prodotti naturali per la Bioedilizia

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

General characteristics

max-recommended-thickness

Max. recommended thickness: 1.5 mm

temperature-of-use

Temperature of use: +8 / +30 °C

shelf-life

Shelf-life: 12 months

highlighted-product

Highlighted product

to-be-applied-in-three-coats

To be applied in three coats

density

Density: 1.49 kg/dm³

Technical specifications

Complete hardening

16-24 h

Hard to touch

4 h

Available colours

- White

Characteristics

The long hardening lime putty, used as a binder, confers distinct breathable, antiseptic and anti-mildew properties. The high aptitude for polishing with spatula exalts the aesthetic, repellent and anti-fouling properties. The marble grain gives a pleasant dotted polychrome appearance.

The special formula of SANAFARBE MARMORINO FINITURA, based on long hardening lime putty, marble dust, natural pigments and minerals, gives great breathability, mildewcide and antibacterial properties to the coating.

Use fields

Smoothing of rough media prior to the application with marbled effect of SANAFARBE MARMORINO FINITURA. Super smooth finish to apply on SANASTOF as an alternative to the plaster finish.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

SANAFARBE MARMORINO FONDO is ready to use, in the form of a thixotropic paste and must be applied with stainless steel trowel, and in two or three coats, depending on the desired level of coverage. The last coat, unless it is provided for additional finishes, must be smoothed carefully, with a spatula or stainless steel trowel, when the product begins to dry. SANAFARBE MARMORINO FONDO can be applied to internal and external surfaces. In the case of cement plaster or lime, like in pre-existing lime-based paints, as long as they are compact and not crumbly, apply directly. Any organic type paints (washable, solvent, etc.) must be removed. Where the subsequent application of SANAFARBE MARMORINO FINITURA is planned, do not proceed with this smoothing.

Application methods

- Spatula

Tool cleaning

- Water

Permitted supports

- Plasters

- Cement-based or lime-based mortars

Warnings, precautions and Ecology

To avoid anti-adhesive effects and possible consequent detachments, take all due care to avoid "polishing" between one coat and the next. Avoid application in the presence of rainfall and high humidity.

Colours may vary slightly depending on temperature conditions at the time of spreading and during the drying and dessication phases.

Share

Calculate consumption

Calculate an approximate measurement of necessary consumption for this product