breathable Mineral coating with marmorino (lime and marble powder) effect

Code: PRT.0150

Components: 1

Appearance: Paste

Thick coating-finishing, easy to spread, in imitation of marble, which can be obtained in glossy or matte form, for external and internal use, breathable and water-repellent, based on lime putty, micronised marble dust and specific agents, mould-proof, non-absorbent vis-à-vis soilings. Available in various colours, with ample alternative shades, which can be formulated on request.

Certification obtained and Standards

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

Sanageb - Prodotti naturali per la Bioedilizia

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

General characteristics


Temperature of use: +8 / +30 °C


To be applied in two coats


Shelf-life: 12 months


Density: 1.48 kg/dm³

Technical specifications

Hard to touch

4 h

Complete hardening

12 - 24 h

Available colours

- White


The long hardening lime putty, used as a binder, confers distinct breathable, antiseptic and anti-mildew properties. The high polishing aptitude with the spatula exalts, the aesthetic, repellent and anti-fouling properties.

The special formula of SANAFARBE MARMORINO FINITURA, based on long hardening lime putty, micronised marble dust, natural pigments and minerals, gives great breathability to the coating, remarkable mildewcide and antibacterial properties.

Use fields

Decorative final coat, with marmorino (lime and marble powder) effect, for the construction of fine protective and decorative coatings, for ecological building interventions, new buildings and in the restoration of vintage buildings and monuments.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

SANAFARBE "MARMORINO" is ready-to-use, in the form of a thixotropic paste and must be applied with stainless steel trowel, and in two or three coats, depending on the desired level coverage. The last coat must be trowelled carefully, always with a spatula or stainless steel trowel, when the product begins to dry. SANAFARBE “MARMORINO” can be applied to internal and external surfaces. In the case of cement plaster or lime, like in pre-existing lime-based paints, as long as they are compact and not crumbly, apply directly.

Any organic type paints (washable, solvent, etc.) should be removed. In the presence of rough and/or non-homogeneous surfaces, preliminary homogenisation by application of SANAFARBE MARMORINO FONDO is required.

Application methods

- Spatula

Tool cleaning

- Water

Permitted supports

- Plasters

- Paint

Warnings, precautions and Ecology

Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.