Natural, protective, decorative, breathable, pigmented, non-toxic putty coat, naturally mildewcide, based on hardened lime putty and botticino marble dust. Formulation prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Specifications for organic binder based interior and exterior plasters
Shelf-life: 12 months
Density: 1.77 kg/dm³
Temperature of use: +8 / +30 °C
Coefficient of permeability
- Pail 5 kg
- Pail 25 kg
Product based on lime putty and natural pigments.
SANAFARBE putty coat has a high breathability, a remarkable mildewcide and antibacterial capacity. It has no solvents, thinners, harmful substances in general.
Indicative consumption depending on the different particle sizes of SANAFARBE I available:
1 mm GRAIN: approximately 1.6 -1.8 kg/m²;
1.2 mm GRAIN: approximately 1.8 -2.0 kg/m²;
2 mm GRAIN: approximately 2.4 -2.8 kg/m²;
2.2 mm GRAIN: approximately 2.6 -3.0 kg/m².
The indicated yields refer to smooth supports and are for guidance only. Actual consumption must be identified with a suitable practical test.
Embodiment of putty coat finishing, protective and decorative, internal and external masonry building, in ecological building interventions and in the restoration of vintage buildings and monuments.
The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed.
Spread SANAFARBE I, into two coats: the first, by simple deposition, with steel trowel, the second for laying and finishing, with sponge float. The application of the second coat must be carried out, when the first coat starts to dry, in one of two conditions suggested: with dry trowel, for smooth surfaces, with moistened trowel, for antique-effect surfaces. SANAFARBE-I is dry to the touch after 4 hours, it can be overcoated after 2-5 hours, while it will be dry in-depth after 16-32 hours.
- Finishing trowel
- Sponge float
- Cement-based or lime-based mortars
- Plaster (gypsum)
The colours may vary slightly depending on the temperature conditions at the time of laying and during the drying and dessication steps.
Avoid prolonged direct exposure of the fresh surfaces to the wind and the sunshine.
PROTECH SIL I
Classic siloxane putty. Breathable, resistant and totally water repellent. Recommended product!
SANAFARBE MARMORINO FINITURA
it is classic putty to create finishes with a Marmorino effect. Breathable, natural and ecological.
SANAFARBE MARMORINO FONDO
Specific base to create marbled effect on wall surfaces. To combine with SANAFARBE MARMORINO FINITURA.
Classic potassium silicate putty. Natural, ecological and breathable. Offers better performance than SANAFARBE I.