SANADEK

Non-toxic breathable paint, for interiors, based on lime putty

Code: PRT.0146

Components: 1

Appearance: Liquid

Breathable, natural, non-toxic paint, for internal use, diffusive type, based on long hardening lime putty, prefiltered. Mineral-based, active formulation, high natural anti-mildew and anti-condensation capacity, prepared according to the traditional recipes, for use in ecological building interventions and in the restoration of vintage buildings and monuments.

Functional categories
Customs Code
3209 9000

Certification obtained and Standards

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

Sanageb - Prodotti naturali per la Bioedilizia

Product belonging to Sanageb, Azichem's product line dedicated to green-building, sustainability in constructions and bio-architecture since 1994.

General characteristics

temperature-of-use

Temperature of use: +8 / +30 °C

shelf-life

Shelf-life: 12 months

density

Density: 1.39 kg/dm³

Technical specifications

Dry residue

65 %

Wet abrasion resistance

3 _

Available colours

- White

Characteristics

Product based on lime putty and natural pigments.

SANADEK has high breathability, it has remarkable mildewcide and antibacterial properties. It has no solvents, thinners, harmful substances in general.

Use fields

Decorative and interior renovation paint.

Preparation of supports

The application supports will be free from fouling, powder, non-adhering parts, etc.; existing paints (washable, organic, solvent based etc.) must be removed. A preliminary fixative treatment of the surfaces is always advisable with a consolidating, transparent, SANAXIL FIX primer, based on potassium silicate. The application of SANAXIL FIX can be done by brush, roller or spray: the number of hands required and the dilution ratio with the most suitable water must be determined according to the conditions and absorption degradation of the supports. The admissible dilution range provides for water addition up to a maximum of 1:1 ratio.

Use method

Apply by brush, roller, spray, in two coats, spaced-apart, one from the other, by about 24 hours.

Application methods

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Plasters

- Cement-based or lime-based mortars

- Drywall

- Plaster (gypsum)

- Fiber-cement

Warnings, precautions and Ecology

Colours may vary slightly depending on the temperature conditions at the time of spreading and during the stages of drying.

Share