REPAR TIX G2

Thixotropic slightly expansionary mortar, for anchoring and underpinning

Code: REP.0068

Components: 1

Appearance: Powder

Thixotropic, reinforced fibre, anti-shrink mortar, slightly expansive in plastic phase, high-performance in terms of resistance and waterproofing characteristics, specific for the compensation of cavities and detachments in roughcast underpinning, and for accurate fixing of wooden or steel beams in masonry whatever its nature.

Linee di appartenenza

General characteristics

max-recommended-thickness

Max. recommended thickness: 8 cm

maximum-diameter-of-aggregate

Maximum diameter of aggregate: 2 mm

min-recommended-thickness

Min. recommended thickness: 1 cm

mix-with-water

Mix with water: 12-13 %

nonflammable

Nonflammable

pot-life

Pot-life: 60 min

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: +5 / +35 °C

use-wearing-protective-gloves

Use wearing protective gloves

Technical specifications

Compressive strength

45 N/mm²

Darcy impermeability

10⁻⁹ cm/s

Density

1900 kg/m³

Flexural strength

7 N/mm²

pH

>12 _

Static elastic modulus

19000 N/mm²

Available colours

- Gray

Packaging and dimensions

- Bag 25 kg

- Pallet: 50 x (Bag 25 kg)

Characteristics

REPAR TIX G2 is based on high-resistance cements, superpozzolanic fillers, plasticisers, stabilisers, and anticorrosive agents, antiallergic additives, selected aggregates. Free of chloride, aluminium, metal powders and aggressive substances in general.

Consumption

Approximately 19 kg/m² of REPAR TIX G2 for every centimetre of thickness to be implemented (approximately 1900 kg per cubic metre).

Use fields

Fixing and anchorages of I-beams, clamps, beams, metal structures, reinforcing rods, prefabricated elements etc. Execution of render underpinning, in civilian, industrial, rural and infrastructural building, both for restructuring and newly built.

Preparation of supports

Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Use method

Pour about 2/3 of the mixing water into the mixer, add REPAR TIX G2 and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 12-13% of the weight of the bag. After mixing is completed wait a few minutes before applying.

For high anchoring sections add GHIAIETTO 6.10 (please refer to the appropriate technical data sheet for more information).

Application methods

- Brick trowel

- Finishing trowel

- Spatula

Tool cleaning

- Water

Permitted supports

- Concrete

- Prefabricated concrete

- Bricks

- Mixed walls (bricks and stones)

- Stone walls

Warnings, precautions and Ecology

Adopt laying procedures capable of ensuring the absence of gaps and discontinuities; cure the protection and the prolonged moist hardening of exposed surfaces.

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Syntech H.A.G.
  • Sanageb
  • Syntech Poliurea