Thixotropic, rheoplastic, structural, two-component fibre reinforced mortar

Code: REP.0134

Components: 2

Appearance: Powder + Liquid

Structural, two-component, composite , reinforced fibre cement mortar, based on high-resistance cements, superpozzolanic fillers, hydrodispersed polymer resins, anti-shrinkage agents, plasticisers, stabilisers, and anticorrosive agents, antiallergic additives, selected aggregates, READYMESH polypropylene fibres.

Linee di appartenenza

Certification obtained and Standards

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

EN 998-1

Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)

Products and systems for the protection and repair of concrete structures - Structural and non-structural repair

EN 1504-3

Products and systems for the protection and repair of concrete structures - Structural and non-structural repair

General characteristics


Shelf-life: 12 months


Temperature of use: +5 / +35 °C




Maximum diameter of aggregate: 1.5 mm


Min. recommended thickness: 5 mm


Pot-life: 60 min


Max. recommended thickness: 3-4 cm

Technical specifications

Adhesion to substrate

2.3 N/mm²

Capillary absorption

0.54 kg•h^0.5/m²

Flexural strength

> 6 N/mm²


> 12 _

Average carbonation depth

3.7 mm

Chloride content

0.01 %

Darcy impermeability

1 x 10 E-10 cm/s

Compressive strength

> 40 N/mm²

Reaction to fire

A1 _

Static elastic modulus

16000 N/mm²

Coefficient of permeability

22.1 μ

Available colours

- Gray

Packaging and dimensions

- Plastic can 5 kg [B]

- Bag 25 kg [A]

- Kit: 1 Bag 25 kg [A] + 1 Plastic can 5 kg [B]


REPAR TIX BIC, represents the best balance between the different requirements of mechanical strength and deformability indicated by several updated terotechnological guidelines. The remarkable characteristics of adhesion, dimensional stability and deforming capacity, are combined with anti-cracking attitudes induced by three-dimensional diffuse micro-reinforcement provided by a balanced mix of polypropylene and glass fibres, and further characteristics related to durability resulting from the superpozzolanic reactivity of the peculiar reactive fillers contained in component B, ensuring the best protection against atmospheric agents, chlorides and sulphates etc.


Approximately 20 kg/m² of REPAR TIX BIC for every centimetre of thickness to be implemented (approximately 2000 kg per cubic metre).

Use fields

Restorations and repairs, structural recovery, reinforcement reconstruction, construction of reliable and durable coatings for building, civil, hydraulic, industrial, concrete and masonry works, also in marine environments or mountainous.

Preparation of supports

Application surfaces should be clean, free of dirt, crumbling and non-adhering parts, dust etc., and saturated with water "saturated with dry surface"..

Use method

Pour component B (liquid) into a container (bucket or other), gradually add and mix in component A (powder), continue to mix until the mixture is totally lump-free.

Provide reconstruction thicknesses in the range 5 to 30-40 mm; for greater thicknesses add 3-6 mm gravel (add up to 30% by weight of the initial compound). High coating thicknesses, static monolithic requirements, etc., it may be necessary to resort to appropriate reinforcements (electrowelded mesh etc.) anchored to the support with SYNTECH PROFIX or GROUT MICROJ or REPAR TIX G2.

Application methods

- Finishing trowel

- Shotcrete machine

- Plastering machine

- Spatula

- Brick trowel

Tool cleaning

- Water

Permitted supports

- Concrete

- Prefabricated concrete

- Fiber-cement

- Mixed walls (bricks and stones)

- Stone walls

Warnings, precautions and Ecology

Thermal range of application and conservation: +5 / +35 °C, does not apply in case of direct exposure to sunlight. Cure the protection and the moist hardening of exposed surfaces.


Products on display

  • Sanawarme
  • Readymesh
  • Syntech H.A.G.