Adhesive, thixotropic, reinforced fibre cement mortar, for high-performance structural finishing coats, for planar compensation and reconstruction of structural works and concrete structures under severe environmental and climate conditions, in urban, mountainous, marine and industrial environments.
Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)
Shelf-life: 12 months
Pot-life: 30 min
Max. recommended thickness: 8 mm
Use wearing protective gloves
Temperature of use: +5°C/ +35 °C
Maximum diameter of aggregate: 0.5 mm
Min. recommended thickness: 3 mm
Resistance to carbonatation
Reaction to fire
> 50 N/mm²
> 6.5 N/mm²
Determination of thermal compatibility
- Bag 25 kg
REPAR SM FR and a plaster end, monocomponent, thixotropic, rheoplastic, composite, "multipurpose"; based on high-resistance cements, superpozzolanic fillers, hydrodispersed polymeric resins, plasticisers, stabilisers, and anticorrosives, antiallergic additives, selected aggregates, glass microfibres and polypropylene.
Homogenising, protective and waterproofing high hardness and high-performance finishing coats, for works and structures in reinforced concrete, even in cold temperatures and in severe operating conditions.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Pour about 2/3 of the mixing water into the mixer, add REPAR SM FR and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 15-18% of the weight of the bag. After mixing is completed wait a few minutes before applying. It is recommended to prepare a limited quantity of mixture at a time, to avoid waste. Place on site using a spatula and/or trowel.
- Finishing trowel
- Brick trowel
- Sponge float
- Cement-based or lime-based mortars
- Prefabricated concrete
Adopt the necessary curing procedures and cure the protection and moist hardening of exposed surfaces, which must also be protected from rain, from direct solar irradiation, ventilation, etc.
It is the classic monocomponent finishing coat for artefacts in renovated concrete! Reliable, efficient and easily applied.
REPAR SM BIC
It is the two-component version of REPAR SM. More workable, more adhesive, more waterproof and moderately deformable.
The ecological version of REPAR SM. Specifically for finishing coats, even reinforced, plaster with a hydraulic lime base.
It is the white cement version of SANASTOF, with improved performance.