Appearance: Twisted fibers
READYMESH PF-540 is a stranded structural polyolefin macro-fibre, high-performance, with a length of 54 mm, specific for the realisation of continuous surfaces made of concrete, it can also be used in replacement of traditional steel reinforcement. The texture, length and surface finishing of READYMESH PF-540 was designed and developed specifically for "exposed" applications, such as industrial floors made of concrete.
EN 14889-2:2006 (System 1)
Structural fibres for concrete. Polymer fibres. Definitions, specifications and conformity.
Floor - Prodotti per pavimenti e massetti in calcestruzzo
Product of the Floor line, the line of products from Azichem Srl dedicated to the main, complementary products and accessories for the construction, restoration and/or renovation of concrete floors and screeds.
Lenght: 54 mm
Density: 0.91 g/cm³
Diameter: 0.48 mm
Effects on the consistency of fresh concrete (Vebè)
Breaking load longitudinal
Number of filmanets
- Hydro degradable bag 1 kg
- Box: 10 x (Hydro degradable bag 1 kg)
The addition of READYMESH PF-540 to the mixture gives the concrete and the resulting manufacture a greater resistance to the forces of traction/bending, reduces the risk of breakage and "spalling" of the concrete component in the corners and edges, drastically reduces the phenomenon of cracks due to shrinkage during the first hours of curing of the concrete.
The particular shape and consistency, allows READYMESH PF-540 not to interfere with the process of mechanical floating typical of industrial floors made of concrete, thus allowing a good surface finish. In addition, the use of READYMESH PF-540 instead of the traditional armour of steel is a great saving of costs of material and installation times (in addition to being lighter, environmentally friendly and safe than electrowelded mesh).
Variable according to the performance to be achieved in the industrial flooring to be built (on average 1 to 2 kg for each cubic metre of concrete).
Industrial flooring, also in replacement of steel mesh. Prefabrication. Widespread three-dimensional high anisotropy reinforcement of concretes in general.
Add the fibres to the concrete during mixing. Mix, with the drum of the mixer truck at full speed, for at least one minute for each m³ of concrete. The dosage, depending on the use, is normally included between 1 to 6 kg/m³ In the case of industrial flooring, it is not recommended for use with doses higher than 3 kg/m³
- To be added to other components
During the construction of industrial flooring, and in particular for the drafting and smoothing of concrete with power trowel, keep in mind that the speed of hardening of the reinforced concrete may be slightly accelerated.
Integrated system to build industrial concrete floors with innovative and particular properties that differentiate it from those defined as being "traditional" due to drastic reduction or definitive elimination.
Certified structural polyolefin fibre, with high performance, specified for shotcrete and large prefabrication.
Multi-filament, polypropylene fibre, to reduce the phenomenon of cracks due to concrete plastic shrinkage. Versatile, efficient, reliable and cheap. Can practically be used in any situation and with any concrete!
6 mm multi-filament polypropylene fibre, indicated to reduce cracks in the packaging of mortar and plaster.
It is a shorter 10 mm version of READYMESH PS-480, highly appreciated in the prefabrication sector.