Structural, fibre-reinforced thixotropic cement skim coat, with excellent adhesion characteristics, resists compression, bending and abrasion, etc. Ideal for structural renovation of works and manufactured pieces in deteriorated concrete. Apply using a trowel.
Specification for Mortar for Masonry - General purpose rendering/plastering mortar (GP)
Shelf-life: 12 months
Use wearing protective gloves
Temperature of use: +5 / +35 °C
Maximum diameter of aggregate: 0.7 mm
Min. recommended thickness: 3 mm
Pot-life: 60 min
Max. recommended thickness: 8 mm
< 0.01 %
> 30 N/mm²
Determination of thermal compatibility
Resistance to carbonatation
< 0.37 _
Reaction to fire
> 12 _
- Bag 25 kg
Rheoplastic, thixotropic, structural, composite skim coat with a special cement and select silicate aggregates base, fibre-reinforced with a balanced mix of polypropylene fibres READYMESH and calcium meta-silicate micro-fibres, with the addition of specific agents with a high rate of micro-silicates. It provides, after hardening, high performance in terms of intrinsic permeability, resistant to run-off and hydrolysing activity, mechanical resistance, to abrasion and cavitation, anti-carbonising properties, chemical-physical stability, resistant to atmospheric aggression and run-off waters. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage).
Approximately 1.8 kg/m² of RASOWHITE for each millimetre of thickness to be made.
Repairs and protective coatings of civil building works in concrete (pillars, walls, balcony cornices, etc.).
The application surfaces should be clean, free of containment, inconsistent and incoherent parts, dust, etc., conveniently saturated with water to reach the "saturated to dry surface" condition.
Place approx. 2/3 of water in the mixer, adding RASOWHITE and the remaining water; continue mixing until you obtain an even mix free of lumps. The mixing water should be approx. 20 - 22% of the weight of the bag. Having completed mixing, wait a few minutes before applying.
Addition of BOND HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity.
- Brick trowel
- Finishing trowel
- Cement-based or lime-based mortars
- Prefabricated concrete
Do not apply in the presence of direct sunshine or strong ventilation. Prolonged care for protection and humid seasoning of the surfaces created.
It is the classic monocomponent finishing coat for artefacts in renovated concrete! Reliable, efficient and easily applied.
REPAR SM FR
Fibre reinforced finishing coat: specifically for non-reinforced finishing of irregular surfaces, where the thickness varies even by many millimetres.
REPAR SM BIC
It is the two-component version of REPAR SM. More workable, more adhesive, more waterproof and moderately deformable.
The ecological version of REPAR SM. Specifically for finishing coats, even reinforced, plaster with a hydraulic lime base.
It is the white cement version of SANASTOF, with improved performance.
It is the less performing version of REPAR SM, gray. In any case, an excellent smoothing compound for concrete and masonry surfaces.