PROTECH WAC

Anti-carbonation acrylic paint, for concrete products

Code: PRT.0117

Components: 1

Appearance: Thick liquid

Anti-carbonation, protective, decorative paint, pigmented for whitewashing concrete surfaces; based on acrylic resins in aqueous emulsion, it forms a film that is impermeable to water, with high vapour permeability, anchored by specific adherence and diffusion. Perfect for protective coatings of infrastructure projects in concrete.

Certification obtained and Standards

Products and systems for the protection and repair of concrete structures - Surface protection systems for concrete

EN 1504-2

Products and systems for the protection and repair of concrete structures - Surface protection systems for concrete

General characteristics

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: + 5 / + 35 °C

solvent-free

Solvent-free

to-be-applied-in-two-coats

To be applied in two coats

nonflammable

Nonflammable

uv-resistant

UV-resistant

density

Density: 1.5 kg/dm³

Technical specifications

1.556 kg/dm³

27.7 %

0.012

Complete hardening

6-8 h

50 μm

22.3 %

0.1959 m

Hard to touch

1-2 h

10.95 g/l

50 %

0.7 MPa

Thickness

58 μm

Available colours

- White

Packaging and dimensions

- Pail 22 kg

Use fields

Painting of protective, decorative and anti-carbonation finish, for walls, façades, concrete products, plaster, masonry, natural stones, porous supports in general. Specific for painting industrial works and infrastructure artefacts: bridges, viaducts, large prefabricated, etc.

Preparation of supports

The surfaces of application should be clean, free of any soiling, crumbling and non-adhering parts, or non-absorbent, dust, pre-existing paints, etc. Degraded or uneven surfaces should be reclaimed with products of the family REPAR or with adhesive cement mortars packaged in situ, based on BOND HG and polypropylene fibres READYMESH PM-180.

Despite it is a good habit to apply an acrylic paint after preliminary treatment of the surfaces with the suitable reinforcing fixative PROTECH FIX AC, in the case of PROTECH WAC this operation is not strictly necessary.

Use method

Apply the product in 2 coats, with a brush, roller or spray, diluting it with water according to the following dosages (% in weight):
- roller or brush = 10%
- spray = 15%-25%

Overcoat only after drying of the previous coat.

Application methods

- Brush

- Paint roller

- Sprayer

- Low pressure airless nebulizer

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Prefabricated concrete

- Fiber-cement

- Rock walls

Share

Products on display

  • Readymesh
  • Syntech Poliurea
  • Pro Seal