Protective and decorative pigmented paint, based on acrylic elastomers in emulsion, thermoplastic fluorinated polymers (Teflon), fillerised aggregates, valuable colouring oxides. Perfect for waterproofing, water-repellent painting of artefacts and works in concrete or masonry in harsh environments (marine and mountain environments, chemical industry, steel mills, etc. ).
Products and systems for the protection and repair of concrete structures - Surface protection systems for concrete
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
To be applied in two coats
Density: 1.52 kg/dm³
Classe I _
- Pail 22 kg
PROTECH WAC-T is a protective finish, high-performing and anti-carbonation, with pearly effect, hydrophobic, breathable, etc. Also perfect for masonry surfaces in the presence of cracks originating from acyclic movements and/or from settling by thermal expansion.
Apply from 0.25 to 0.35 kg of PROTECH WAC-T per square metre of surface to be painted.
Durable protective coating for pondage, ductwork, jetties, viaducts, dams, works in industrial harsh environments, constructions close to the sea, works in marine and mountain environments in general.
The surfaces of application should be clean and free of any soiling, crumbling and non-adhering or non-absorbent parts, dust, pre-existing paint, etc..
Absorbent and/or crumbling supports should be tempered by applying PROTECH FIX AC or ACS (for a indicative consumption of 0.12 kg/m²). Any static millimetric cracking, should be enlarged, impregnated using a brush with short bristles with PROTECH FIX AC or PROTECH FIX ACS, then filled with FIBROSTUCK.
Apply the product in 2 coats, with a brush, roller or spray, diluting it with water according to the following dosages (% in weight):
- first hand = 40%-50%
- second hand = 15%-20%
Follow the recommended minimum consumption (350 g/m² in two hands) so as not to compromise the elastic properties that protect the product. Overcoat only after the previous coat has dried.
- Paint roller
- Low pressure airless nebulizer
- Cement-based or lime-based mortars
- Prefabricated concrete
- Rock walls
Do not apply in case of direct exposure to sunlight or at temperatures below 5°C. Protect from rain for at least 48 hours.
It is classic acrylic paint for any type of paint support. Due to its elastomer nature, it is also suitable for surface micro-cracks. Recommended!
PROTECH QUARZ PLAST
Classic acrylic "quartz" paint. Efficient, reliable and cheap!
PROTECH SIL P
Siloxane paint, water-repellent, transparent with high UV ray resistance. Also excellent on indoor surfaces, if you want to create washable paint. Recommended!
PROTECH SIL P WAX PEARL
It is Azichem's highest technological expression in the protective paint field for wall surfaces. It is breathable and highly water-repellent, with a Lotus flower effect and sufficient elastomeric. Recommended!
High breathability acrylic paint (in the acrylic paint sector). Less elastic than PROTECH ELC, it is recommended for painting supports not yet perfectly cured, for example new concrete renovation work.
It is the version only applicable on indoor surfaces of SANAFARBE P.
Classic paint with lime putty, suitable for indoors and outdoors. Non-toxic, totally natural and ecological.
It is the version only applicable on indoor surfaces of SANAXIL P.
Classic paint with potassium silicate, suitable for indoors and outdoors. Non-toxic, totally natural and ecological. Lasts longer than SANAFARBE P.