PROTECH SIL P - THERM

Anti-condensation siloxane paint, sanitizing, heat-reflecting

Code: PRT.0336

Components: 1

Appearance:

Anti-condensation paint, elastic, sanitizing, heat-reflecting ideal for both external and internal facades, based on siloxane resin in emulsion, with high water vapour permeability and excellent covering power.

General characteristics

dosage

Dosage: 0.3 / 0.4 kg/m²

max-recommended-thickness

Max. recommended thickness: 280 μm

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: +5 / +3 °C

density

Density: 1.62 ± 0.05 kg/dm³

highlighted-product

Highlighted product

to-be-applied-in-two-coats

To be applied in two coats

min-recommended-thickness

Min. recommended thickness: 180 μm

Technical specifications

0.10

Permeability to water vapor

115 μ

Hard to touch

1 - 2 h

0.06 m

Wet abrasion resistance

2 _

Dust-free time

30 min

Solar reflection index (SRI)

108 _

Deep hardening

16 - 24 h

Available colours

- White

Packaging and dimensions

- Pail 4 l

- Pail 14 l

Characteristics

PROTECH SIL P - THERM is a paint suitable for any type of mineral substrate, such as old and new plasters, synthetic plasters, sandstone walls, etc. For old emulsion paints, remove non-adherent parts, remove any impurities, repair any cracks or crevices and then consolidate everything with PROTECH FIX AC - THERM, a silicon water repellent fixative primer, also suitable for highly alkaline substrates.
PROTECH SIL P - THERM has excellent covering power: class 1 according to EN 13300 for a yield of 6/7 m2/l.

Consumption

Apply from 0.20 to 0.30 kg of PROTECH SIL P-THERM per square metre of surface to be painted.

Use fields

In addition to the painting of external facades and internal environments, PROTECH SIL P-THERM has been designed especially for buildings and monuments subject to the protection of the ministry of cultural heritage. The binder based on an emulsion of silicones has allowed to develop a microporous filter impermeable to heavy rain, and at the same time permeable to the diffusion of water vapour. The great advantage of this paint is that it can be applied both on mineral (inorganic) supports and on previously treated supports with emulsion-based paints, creating a physical adhesion, with extremely microporous films. The particular chemical structure of the silicone binder produces a film resistant to light and atmospheric agents that is not destroyed even by microorganisms.

Preparation of supports

For old emulsion paints, remove non-adherent parts, remove any impurities, repair any cracks or crevices and then consolidate everything with PROTECH FIX AC - THERM, a silicon water repellent fixative primer, also suitable for highly alkaline substrates.
SUPPORTS ALREADY PAINTED WITH SILICATE PAINT
Remove any stains and proceed with painting with the siloxane paint. (it is always recommended to apply a coat of siloxane impregnating agent).
NEW SUPPORTS
Apply a coat of siloxane acrylic fixative diluted from 20 to 60% with water depending on the absorption of the support.
OLD SUPPORTS
On old supports, remove the old paint by brushing, fill in any holes or imperfections in the wall with a suitable filler, proceed with fixing with siloxane impregnating agent diluted 20 to 60% with water depending on the absorption of the support.

Use method

DILUTION (in volume with potable water)
1st COAT:
BRUSH: 15% one coat crossed or two coats 12-24 hours apart
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%
2nd COAT
BRUSH: 10%
ROLLER: 10%
SPRAY (with specific equipment): 15 - 25%

On large surfaces, it is recommended to apply the product of the same lot and proceed always wet on wet to avoid signs of resumption. Never operate at temperatures below + 5°C. Rainy weather, excessive atmospheric humidity and temperatures below + 8°C, can considerably compromise drying with the possibility of rainwater washout even after several days. In these situations, it is advisable to protect the facades from unpredictable showers, in order not to jeopardize the success of the work. For storage store in tightly closed containers and protect from frost.

Application methods

- Low pressure airless nebulizer

- Brush

- Paint roller

- Sprayer

Tool cleaning

- Water

Permitted supports

- Plasters

- Concrete

- Cement-based or lime-based mortars

- Prefabricated concrete

- Drywall

- Plaster (gypsum)

- Fiber-cement

Share

Products on display

  • Osmocem
  • Opus Dry
  • Floortech Prerit