Reinforcing transparent fixative primer, based on siloxane resin, specific for the preliminary treatment of plaster before applying the siloxane paint PROTECH SIL P or the siloxane putty coat PROTECH SIL, in the renovation of civil and industrial buildings and new buildings.
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Use wearing protective gloves
Use wearing protective glasses
Hard to touch
- Pail 5 l
- Pail 20 l
From 0.10 to 0.15 litres of PROTECH SIL FIX for each square metre of surface to be treated, based on the porosity of the support.
Preliminary fixative for painting and coating with protective finishes and decorative systems with pigmented siloxanes. PROTECH SIL FIX can be applied on old and new plaster, cement, synthetic- and lime-based, on pre-existing mineral and synthetic paints, etc.
The surfaces of application should be clean, free of any soiling, crumbling and non-adhering parts, or non-absorbent, dust, pre-existing paints, etc.
Apply the product with roller, brush or airless at low pressure, at about 120 g/m².
- Low pressure airless nebulizer
- Paint roller
- Cement-based or lime-based mortars
- Prefabricated concrete
- Plaster (gypsum)
Keep away from open flames and sources of heat; use with protective gloves and goggles.
It is always essential to carry out preliminary tests to check the appropriateness of the product, depending on specific requirements.
PROTECH FIX AC
It is water acrylic fixative, use before applying any type of paint or plaster. Efficient, reliable and cheap! Recommended!
PROTECH FIX ACS
It is the solvent based version of PROTECH FIX AC. Recommended in all cases in which the support is low absorbing.
PROTECH FIX TUNNEL
It is a specific fixative to paint tunnels and galleries with PROTECH TUNNEL.
It is a specific fixative for paint and putty coats with silicate (SANAXIL P and SANAXIL I). It is compatible with lime, silicate or siloxane based paint and coatings.