PROTECH ROAD PAINT

Thick film coating specific for the protection of asphalts and bitumens

Code: PRT.0342

Components: 1

Appearance: Thick liquid

PROTECH ROAD PAINT is a thick paint based on acrylic resins in aqueous emulsion for the protection and waterproofing of bituminous floors in urban and pedestrian areas. PROTECH ROAD PAINT is ideal for surfaces in car parks, yards, cycle paths and sidewalks, it also increases the resistance of the floor to wear, UV rays and chemical aggression.

Linee di appartenenza

General characteristics

density

Density: 1.64 ± 0.1 kg/dm³

dosage

Dosage: 2.0 kg/m²

shelf-life

Shelf-life: 12 months

temperature-of-use

Temperature of use: +10 / +40 °C

to-be-applied-in-two-coats

To be applied in two coats

use-wearing-protective-glasses

Use wearing protective glasses

use-wearing-protective-gloves

Use wearing protective gloves

uv-resistant

UV-resistant

Technical specifications

Dry residue

75 ± 0.5 %

Hard to touch

2 h

Resistant to chemical agents

Time before second coat

4 h

Viscosity

90.000 ± 2.000 mPas

Available colours

- Gray

- Green

- Red

Packaging and dimensions

- Barrel 100 kg

Characteristics

PROTECH ROAD PAINT avoids the migration of bituminous binders and the accumulation of heat due to sunlight and allows to:
- Reduce the disintegration, breakage and swelling of the bituminous artefact.
- Protect the paving in bituminous conglomerate from sudden changes in temperature.
- Increase the durability of the work.
- Improve the aesthetics of the flooring and reduce the environmental impact
being able to choose from various colours.
- Noticeably reduce bitumen odours.

Consumption

Approximately 2.0 kg/m² of PROTECH ROAD PAINT in two coats.

Use fields

PROTECH ROAD PAINT is formulated for the finishing and protection of manufactured products
in bituminous conglomerate in urban and pedestrian areas such as yards, avenues and preferential lanes, sidewalks and cycle paths, sports facilities.

Preparation of supports

Remove all traces of dust and traces of oils, greasy substances and incoherent parts. On a dry support, apply PROTECH ROAD PAINT according to the methods described in the instructions for use.

Use method

PROTECH ROAD PAINT can be diluted with water in a percentage not exceeding 30%. The application on a dry and clean surface is done manually with a roller for a minimum of 2 coats until saturation depending on the porosity of the support. We do not recommend the application with temperatures below +10°C.

Application methods

- Brush

- Paint roller

- Spatula

Tool cleaning

- Water

Permitted supports

- Bitumen waterproofing membranes

- Asphalt

Contact us now

Vuoi saperne di più sui nostri prodotti?

Attention, correctly compile this field.
Attention, enter a valid email address.
Attention, correctly compile this field.

By submitting I accept the privacy policy

Attention, correctly compile this field.

Subscribe to the newsletter

Share

Products on display

  • Syntech H.A.G.
  • Opus Dry
  • Readymesh