Gripping polyurethane primer for the preparation of the joints in concrete, masonry, etc. surfaces for subsequently filling with polyurethane (PROTECH FLEX) and/or epoxy-polyurethane (EG 91) sealants.
Shelf-life: 8 months
Temperature of use: +5 / +35 °C
Density: 1 (± 0.01) kg/dm³
Pot-life: 60 min
Use wearing protective gloves
30 (±5) mPa
- Canister 1 kg
Approximately 0.02 kg of PROTECH FLEX PRIMER for every linear metre of joint to be treated.
Preliminary reinforcing impregnation of concrete surfaces, forming walls of flooring and roofing joints, prior to sealing it with polyurethane and epoxy-polyurethane sealants.
The application surfaces should be clean, free of incrustations, crumbling and non-adhering parts, dust etc.
Apply PROTECH FLEX PRIMER, using a brush with short bristles, on the walls of the joint to be sealed.
It is appropriate to provide for the insertion in the joint, whatever its nature and the specific foamed polyethylene kerb FILTENE FONDOGIUNTO, of the appropriate size for the joint to be sealed.
- Nitro thinner
- Cement-based or lime-based mortars
- Prefabricated concrete
- Metal surfaces
- Floor screed
Warning: it is a highly flammable material.
Integrated system to build industrial concrete floors with innovative and particular properties that differentiate it from those defined as being "traditional" due to drastic reduction or definitive elimination.
PROTECH BALCONY is a ready to use concentrated single-component solution, made out of silicone-based resins and organic polymers catalysed in solvent. The solution viscosity is lower than that of water, so as to penetrate any cracks liable for water