Anti-shrinkage micromortar, rheoplastic, superfluid consistency, injectable, based on high-resistance cements, superpozzolanic fillers, modifiers, polymeric agents, anti-shrinkage agents, anti-allergic additives, selected aggregates.
Masonry mortars - Masonry mortar for general purposes (G)
Floor - Prodotti per pavimenti e massetti in calcestruzzo
Product of the Floor line, the line of products from Azichem Srl dedicated to the main, complementary products and accessories for the construction, restoration and/or renovation of concrete floors and screeds.
Shelf-life: 12 months
Pot-life: 60 min
Mix with water: 15 %
Temperature of use: +5 / +35 °C
Maximum diameter of aggregate: 0.45 mm
Static elastic modulus
Injections of reinforcement and reinforcement of concrete, masonry, rock works etc. Anchoring and fixing of ties, electrowelded steel mesh, beam ends for construction joints etc. Sealing of post-tensioning sheathing. Creation of filling paddings in the spaces between conduits and excavation holes.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Pour 2/3 of the total mixing water in the concrete mixer, gradually add the product and the remaining water, mixing until a homogeneous lump-free mixture of the desired consistency is obtained. Apply on-site by injection or pouring within 60' from mixing with water.
- Pour out
- Mixed walls (bricks and stones)
- Stone walls
Adopt casting procedures capable of ensuring the absence of discontinuities and air bubbles.
Do not use in the absence of adequate confinement.
Cure the protection and the moist hardening of exposed surfaces.
Power additive to create reinforced grout, injectable, to add to cement or hydraulic lime.
Cement grout (binary mix without aggregates), slightly expansive, ready for injection with low pressure or dropped into walls, with the sole addition of water. You are advised to use in walls built before 1900.
Hydraulic lime based grout (binary mix without aggregates), slightly expansive, ready for injection with low pressure in walls, with the sole addition of water. Perfect for monument restorations of historic works.
Product similar to GROUT MICRO-J, specifically for sealing joints between block paving and natural stone flooring in general.