Anti-shrinkage, rheoplastic, castable mortar, for precision anchorage of operating machines, turbines, rolling mills, bridge cranes, etc. Based on cement binders, super-lubricants meeting agents, compounds-resistant mortar, specific polymers, selected aggregates, superpozzolanic reactive fillers.
Products and systems for the protection and repair of concrete structures - Anchoring of reinforcing steel bar
Products and systems for the protection and repair of concrete structures - Structural and non-structural repair (R4)
Shelf-life: 12 months
Temperature of use: +5 / +35 °C
Mix with water: 14 %
Maximum diameter of aggregate: 2 mm
Min. recommended thickness: 2 cm
Pot-life: 30 min
Max. recommended thickness: 15 cm
< 0.01 %
Static elastic modulus
> 75 N/mm²
Determination of thermal compatibility
Resistance to carbonatation
> 10 N/mm²
Reaction to fire
- Bag 25 kg
- Pallet: 50 x (Bag 25 kg)
For the realisation of road joints, in works with high motor vehicle traffic, GROUT 2 can be added with 25 kg/m³ (300 gr/25 kg bag) of READYMESH M1-220 steel fibres and 1 kg/m³ (10 gr/bag) of READYMESH PM-060 polypropylene fibres.
Precision anchorage of operating machines: presses, turbines, power supplies, rolling mills, alternators, bridge cranes, metal structures, tracks, etc. Structural adjustments, restorations, drawing and armouring, through injections or castings poured in caisson. Realisation of connecting anchorages through steel bars with diameter and depth consistent with design specifications, through casting in perforations provided for this purpose. Construction of structural road joints.
Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".
Insert 2/3 (approximately 2.5 litres per bag) of the total mixing water in the cement mixer, then gradually add the product and the remaining water, mix until a homogeneous lump-free mixture of the desired consistency is obtained.
For high anchoring sections GHIAIETTO 6.10 should be added (please refer to the appropriate technical data sheet for more information).
- Pour out
- Prefabricated concrete
- Mixed walls (bricks and stones)
- Rusty reinforcement rods
Given the self-levelling properties of the product and its self-compacting properties, it is recommended to pay special attention to the vibration step. A excessive zeal in the vibration operation can worsen the aesthetic appearance of the resulting product.
Do not use in the absence of adequate lateral confinement.
Cure the protection and the moist hardening of exposed surfaces.
Adopt casting procedures capable of ensuring the absence of gaps and discontinuities, pouring the mortar from a single part of the casting perimetre to avoid air pockets.
GROUT 447 SFR
Semi-liquid mortar, fibre reinforced with steel fibres, specifically for ultra-fast fastening of wells and manhole covers, in road maintenance.
Shrink-proof, castable mortar to use for fastening and anchorage of operating machinery or industrial structures with considerable filling thickness. The aggregate is bigger compared to GROUT 2.
GROUT 6 SFR
It is the fibre reinforced version with steel fibres of GROUT 6, specifically for structural installation of road joints, in road works.
Product unique in its kind, specifically for structural blocks stacked, pillars or works in general in a marine environment, including submerged structures in fresh or salt water. Recommended!
GROUT 6 HP