Reactive, colourless mineral solution for preliminarily re-alkalising and reinforcing concrete surfaces to be restored. It is an inorganic, mineral compound chemical affine with concretes. It reacts with alkali hydrates alkaline and with water, present in the porosity of concretes, mortars and plasters, forming stable silicate gels, which hermetically and lastingly seal the capillary lattice.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Shelf-life: 12 months
Density: 1.02 kg/dm³
Temperature of use: +5 / +35 °C
- Plastic can 5 kg
- Plastic can 10 kg
- Plastic can 25 kg
CONSILEX SAN waterproofs and reinforces the conglomerate both at superficial level and in more internal layers, preventing the penetration of water, harsh solutions etc., it protects the structures from the consequences of freeze-thaw cycles, from harsh processes resulting from the use of antifrost de-icing salts in road works, further facilitating the removal of ice incrustations.
Apply from 0.15 to 0.30 kg of CONSILEX SAN per square metre of surface to be treated.
Through re-alkalisation, hardening, consolidation, conservative maintenance of plasters to base lime and cement, concrete, paving, reservoirs, pipes, tanks, vessels, bridges, viaducts, tunnels, retaining walls, parking areas, airport runways and motorway.
Accurate dedusting and saturation with water, for achieving the condition "dry surface saturation". Saturation is particularly important: the product reacts with substances placed in water solution and uses the same water for forming the gel.
Spray-apply with a low pressure airless pump on cement surfaces to be treated.
For deep reinforcement, apply several coats taking care to apply each coat when the previous begins to dry out.
It can dull aluminium and glass surfaces, ceramised tiles, etc., which must then be protected by taping or other, during application.
Do not apply on mineral surfaces (like plaster and bricks) destined to be visible, without carrying out a preliminary test, as you latent salts may crystallise!
- Low pressure airless nebulizer
- Prefabricated concrete
Volumetric reconstruction cycle and repair of works and structures in highly degraded concrete in aggressive environments such as marine, mountain and industrial environments.
Products cycle to repair concrete structures with cast mortar, with the "block" concrete technique, suitable for medium to large building sections.
Repair, restoration and renewal of concrete structures degraded due to the effects of time or the weather, by applying fibre-reinforced cement mortar, shrinkage-compensated and self-sustaining (thixotropic effect)
CONSILEX SAN HG
Recommended for through re-alkalisation (reviving alkalinity) of the entire surface of the manufactured piece in concrete to restore. The action exerted is more diffused and penetrating than CONSILEX SAN.
Ecological version of CONSILEX SAN. Ideal to consolidate and eliminate pulverisation of the mortar bed , plaster and finishing coats in hydraulic lime.