Appearance: Steel mesh
Trapezoid preshaped steel square mesh cage open only on one side, to be used to encourage correct positioning of the CLAYSEAL 25.20 sodium bentonite waterstops, and to prevent the displacement from the seat provided, especially in complex situations or on surfaces which are not perfectly prepared. Once the joint is inserted, BENTONET will have to be fixed to the concrete support using steel nails and washers every 20-25 cm.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Lenght: 1 m
Use wearing protective gloves
Width: 2.8 cm
1 m/m : product to buy as needed.
Rigid construction joints (non-expanding) and connections with safe and permanent hydraulic seal.
Prepare the smoothest and most planar laying surface, using REPAR TIX to compensate for any inhomogeneity, and accurately remove crumbling, non-adhering, powdery parts.
Spread the sodium bentonite waterstop CLAYSEAL 25.20 in the designated position. Install the BENTONET joint locking cage above the CLAYSEAL 25.20 hydro-expansive kerb. Fix it to the support by nailing: a steel nail every 20-25 cm approximately. The joints between the waterstop kerbs are sealed by simply flanking them by at least 10 cm and not by overlapping the ends.
- Apply by hand
- Cement-based or lime-based mortars
- Prefabricated concrete
The positioning of the CLAYSEAL 25.20 hydro-expansive kerb must ensure a concrete covering of 10-12 cm in order to contain the expansive action caused by hydration.
Products and accessories to lay concrete casts, with both metal and wooden formworks, to create underground structures in the presence of groundwater, without using additional waterproof layers (sheathes, etc.)