Anti-cracking reinforcement mesh, made of alkali resistant fibreglass yarn, for the best distribution of tensions and to avoid shrinkage cracks caused by changes in temperature, due to lack of planar homogeneity etc. They are available in 3 different types: the 160 g/m² version, with a 4.0x4.5 mm square mesh, perfect for reinforced screeds. The standard roll is 1.10 m in height by 50 m in length.
Sanageb - Prodotti naturali per la Bioedilizia
Product of the Sanageb line, the line of products from Azichem Srl dedicated to green-building, ecological sanitation, thermal insulation and energy saving products since 1994.
Width: 100 cm
Suitable for contact with drinking water
Lenght: 50 m
4 x 4 mm
- Roll 50 m²
ARMAGLASS 160 is perfect for preventing the formation of cracks and fissures by spreading the stresses on the whole surface, the use of fibreglass mesh is practically indispensable. The mesh used is generally low basis weight and reduced thickness. They are especially recommended for works of osmotic waterproofing coating, both vertical and horizontal, or in the coating polystyrene modular cladding, wood fibre, cork, etc.
1.1 m/m²: The adjacent sheets of fiberglass mesh must be overlapped along the edges by at least 10 cm.
Reinforces screeds on osmotic waterproofing coatings, both vertical and on balconies and terraces, polystyrene modular cladding, wood fibre, cork, etc.
Lay the wire mesh on the fresh mortar from the top downwards, filling it with a spatula, taking care to overlap them at least 10 cm and to avoid the formation of air bubbles and folds.
- Cement-based or lime-based mortars