Products cycle to repair concrete structures with cast mortar, with the "block" concrete technique, suitable for medium to large building sections.
Re-alkalising, reinforcing, protective, hardener for concrete
Castable, rheoplastic, structural, controlled shrinkage grout mortar
PROTECH FIX AC
Reinforcing acrylic fixative, anti-dust, in aqueous dispersion
Anti-carbonation acrylic paint, for concrete products
Passivating monocomponent cement, anticorrosive, for reinforcing rods
Structural cement skim, thixotropic, fast solidifying
In the event of serious degradation of reinforced concrete, for example in civil, industrial and infrastructural environments, etc. the repair of manufactured works and restoration of the original functionalities of the works are of fundamental importance. In these cases, however, the degraded sections and the "lacking" volumes can be ample enough to force in-depth reconstruction. In these cases, for example, it may not be enough to undertake "surface" reconstruction, making it necessary to carry out "block" intervention on the sections. In these types of intervention, the need often arises to reconstruct the original reinforcements of the manufactured piece, or add new ones, to restore the original structural functionalities of the work.
Cases such as these, therefore, involve interventions whose most effective and efficient method is to build an external formwork and proceed with reconstruction of the section by casting special, technical and industrial mortars with compensated shrinkage, with super-performance, having adequately cleaned the degraded surface, re-alkalinising the pre-existing wall surface, passivated the reinforcement irons exposed and oxidised and preparing any additional reinforcement.
The integrated solution we are presenting is a complete and reliable application cycle which has been in use for ten years now, for "block" restoration (with important volumetric reconstructions) of medium-high degraded manufactured works. It is a re-alkalinising solution (CONSILEX SAN), a cement slurry for passivation of old, rusty reinforcement irons (REPAR MONOSTEEL), a high performance, casting structural mortar with compensated shrinkage (GROUT 6), as well as a finishing cycle (if necessary) and painting to protect the reconstruction from carbonatation. The possible finish is created using special regularisation mortar REPAR SM and the protective painting cycle PROTECH WAC.
The repair of degraded, block concrete with products in this integrated solution, have in GROUT 6 its main component, allowing a brilliant resolution to the most critical solutions in the industrial and infrastructural manufactured works sectors. The numerous success cases confirm its full effectiveness and duration of the system.
Transparent non-pellicular waterproof to be applied without removing the existing flooring
INDUSTRIAL FLOORING with high performance, fibre-reinforced concrete
SYNTECH POLIUREA: waterproofing with elastomeric coatings with high elasticity
CONSILEX INJECT MAUER: stops rising damp with
PRERIT: set retarder for
SYNTECH HAG: infiltration stoppage with hydro-reactive resins
WATERPROOF CONCRETE: special products for underground structures with hydraulic seal.
OSMOCEM FLEX: flexible cement waterproofing for tiled terraces
Repair of concrete structures in marine environments
'REPAR' products: structural renovation with shrink-proof, thixotropic mortar